2 KW PU
Two-Component, Solvent-Free Polyurethane Waterproofing for Drinking Water Tanks
2 KW PU is a two-component, polyurethane-based, solvent-free liquid waterproofing material designed for the protection and waterproofing of drinking water tanks.
• Holds drinking water certification.
• Solvent-free.
• Heat resistance between −40 °C and +90 °C
• Excellent adhesion properties.
• Can be applied in enclosed areas.
• Effective resistance to chemicals.
• An ideal solution for water tanks in terms of price and performance.
• Thixotropic.
![]()
FEATURES AND BENEFITS
-
• Holds drinking water certification.
• Solvent-free.
• Heat resistance between −40 °C and +90 °C
• Excellent adhesion properties.
• Can be applied in enclosed areas.
• Effective resistance to chemicals.
• An ideal solution for water tanks in terms of price and performance.
• Thixotropic.
FIELDS OF APPLICATION
-
• Water tanks and reservoirs
• Concrete water tanks
• Tanks made of steel and other metals
• Surfaces in direct contact with drinking water
Product Details
• First coat (min.): 0.65–0.75 kg/m²
• Second coat (min.): 0.65–0.75 kg/m²
• Total consumption (minimum): 1.30–1.50 kg/m²
Blue, in 20 kg + 4 kg metal pails.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
• Concrete strength class: C20/25
• Substrate moisture content: W<5%
• Temperature: +5 °C to +35 °C
• Relative humidity: <85%
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Product Type | Clever Lab. | 2-comp. solvent-free PU |
| Density | ASTM D 1475 / DIN 53217 / ISO 2811-1 (+20 °C) | 1.40 ±0.05 g/cm³ |
| Viscosity (mixed) | ASTM D 2196-86 | 15,000–20,000 cP |
| Mixing Ratio | Clever Lab. | 5:1 by weight |
| Gloss | Clever Lab. | Semi-matt |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Solids Content | Clever Lab. | 100% |
| Hardness | ASTM D2240, DIN 53505, EN ISO 868 | > 40 |
| Elongation at Break | ASTM D 412 (+23 °C) | > 100% |
| Tensile Strength at Break | ASTM D 412 (+23 °C) | > 15 N/mm² |
| Pot Life | Clever Lab. (+25 °C) | 20–30 min |
| Water Absorption | DIN 53495 | < 0.5% |
| Adhesion to Concrete | EN 1542 (+23 °C) | > 2 N/mm² |
| Service Temperature | Clever Lab. | −40 °C to +90 °C |
| Initial Curing Time | 25 °C / 55% RH | 6–8 h |
| Waiting Time between Coats | Clever Lab. | 6–48 h |
Application
• SURFACE PREPARATION
Before application, all contaminants that impair bonding and adhesion, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the substrate. After cleaning with high-pressure water, the substrate must be dried thoroughly. Surface defects must be repaired with suitable products.
• PRIMING
In enclosed and underground tanks, the solvent-free ClvSeal EP PRIMER WB should be preferred. Once the primer coat has dried, repair holes, cracks, joints and wall corners on the surface with ClvSeal PU 35 sealant. For detailed information, refer to the primer table.
• APPLICATION
Components A and B are combined and mixed with a low-speed mixer for at least 2–3 minutes to make them ready for use. The usable life of the prepared mix is 20 to 30 minutes at +20 °C. Depending on changes in air temperature, the usable life may become shorter or longer. To extend the pot life, pour the product onto the substrate or transfer it into a wider container. Pour the material onto the previously primed surface and spread it in at least 2 coats with a roller or brush until the entire surface is covered; on vertical surfaces, apply at least two coats. Apply the second coat at least 8 and at most 24 hours after applying the first coat. If the second coat cannot be applied within the specified time, consult the CLEVER POLYMERS Technical Department for information and solutions before proceeding.
• Not recommended for unsound substrates.
• Not suitable for waterproofing swimming pools containing chemically treated water