400 BT-1K RAPID
1-Component, Fast-Curing, Elastic, Bitumen-Modified PU Liquid Waterproofing
400 BT-1K RAPID is a single-component, fast-curing, bitumen–polyurethane-based liquid waterproofing material.
• High mechanical strength.
• Cures quickly even at low temperatures and humidity.
• Easy to apply.
• Forms a seamless, leak-free, monolithic film.
• Heat resistance between −40 °C and +90 °C.
• Cold-resistant; remains elastic down to −40 °C.
• Vapour-permeable.
• Owing to its breathable structure, it does not cause moisture to accumulate beneath the layer.
• Excellent chemical resistance.
• Strong adhesion and high elasticity.

FEATURES AND BENEFITS
-
• High mechanical strength.
• Cures quickly even at low temperatures and humidity.
• Easy to apply.
• Forms a seamless, leak-free, monolithic film.
• Heat resistance between −40 °C and +90 °C.
• Cold-resistant; remains elastic down to −40 °C.
• Vapour-permeable.
• Owing to its breathable structure, it does not cause moisture to accumulate beneath the layer.
• Excellent chemical resistance.
• Strong adhesion and high elasticity.
FIELDS OF APPLICATION
-
• Foundations, basements and floors
• Roofs, terraces and balconies
• Wet rooms
• Areas beneath tiles
• Bituminous membranes
• Gypsum and cement boards
Product Details
• First coat (min.): 0.90–1.00 kg/m²
• Second coat (min.): 0.90–1.00 kg/m²
• Total consumption (minimum): 1.80–2.00 kg/m²
Black, in 25 kg metal pails.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
• Concrete strength class: C20/25
• Substrate moisture content: W<5%
• Temperature: +5 °C to +35 °C
• Relative humidity: <85%
| Property | Test Method | Value |
|---|---|---|
| Product Type | Clever Lab. | 1-comp. bitumen–PU |
| Density | ASTM D1475 / DIN 53217 / ISO 2811-1 (+20 °C) | 1.30 ±0.05 g/cm³ |
| Viscosity (mixed) | ASTM D2196-86 (+25 °C) | 3,000–6,000 cP |
| Flash Point | ASTM D93 | 30 °C |
| Gloss | Clever Lab. | Semi-gloss |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Resistance to Heat Ageing | Clever Lab. | 200 days at +80 °C |
| Heat Shock Resistance | Clever Lab. | 150 °C |
| Solids Content | Clever Lab. | 85% (±0.05) |
| Hardness | ASTM D2240 / DIN 53505 / EN ISO 868 | 35 (Shore A) |
| Elongation at Break | ASTM D412 / EN ISO 527-3 (+23 °C) | >800% |
| Tensile Strength at Break | ASTM D412 / EN ISO 527-3 (+23 °C) | >2 N/mm² |
| Adhesion to Concrete | ASTM D4541 (+23 °C) | >2 N/mm² |
| Res. to Heat Ageing (200 d, 80 °C) | EOTA TR011 | Pass |
| Service Temperature | Clever Lab. | −40 to +80 °C |
| Initial Drying Time | Clever Lab. | 1–2 h |
| Waiting Time between Coats | Clever Lab. | 6–24 h |
| Water Absorption (10 days) | Clever Lab. | <1% |
Note: Viscosity measured at +25 °C in accordance with EN ISO 3219. Viscosity decreases as temperature rises.
Application
• SURFACE PREPARATION Before application, all contaminants that may impair adhesion and bonding, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the surface. After cleaning with high-pressure water, the surface must be dried thoroughly. Surface defects must be repaired with suitable products. • PRIMING For absorbent substrates such as concrete, cement or screed, use PU PRIMER 200 or ClvSeal EP PRIMER 617. On damp substrates, ClvSeal EP PRIMER 625 should be preferred. On non-absorbent substrates such as metal and ceramics, use PRIMER T. For detailed information, refer to the primer table.
• 400 BT-1K RAPID must be covered after application.
• Not recommended for unsound substrates.