AQUA PUD HYBRID
Elastic, UV-Resistant PU Dispersion Liquid-Applied Waterproofing Membrane
AQUA PUD HYBRID is a single-component, polyurethane hybrid-based, 100% aliphatic waterproofing material.
• Easy application on vertical surfaces
• Thixotropic
• Excellent UV resistance
• Fast curing.
• Easy to apply (by roller, brush or airless spray)
• Solvent-free
• Contains no toxic substances once fully cured.
• High resistance to standing water
• Elastic
• Forms a fast-drying, UV-resistant, elastic protective coating.
![]()
FEATURES AND BENEFITS
-
• Easy application on vertical surfaces
• Thixotropic
• Excellent UV resistance
• Fast curing.
• Easy to apply (by roller, brush or airless spray)
• Solvent-free
• Contains no toxic substances once fully cured.
• High resistance to standing water
• Elastic
• Forms a fast-drying, UV-resistant, elastic protective coating.
FIELDS OF APPLICATION
-
• Vertical and horizontal areas
• PU foams
• Wet rooms (bathrooms, kitchens, etc.)
• Areas requiring UV resistance
• Lightweight roofs
Product Details
Total consumption (minimum): 2.00–3.00 kg/m²
White, in 20 kg plastic pails.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Product Type | Clever Lab. | PU dispersion |
| Density | EN ISO 2811-1 (+20 °C) | 1.30–1.40 g/cm³ |
| Viscosity | ASTM D2196-86 / EN ISO 3219 (+25 °C) | 5,000–10,000 cP |
| Application Temperature | Clever Lab. | +8 °C to +40 °C |
| Hardness | ASTM D2240 / DIN 53505 / EN ISO 868 | >65 (Shore A) |
| Elongation at Break | ASTM D412 (+23 °C) | >250% |
| Tensile Strength at Break | ASTM D412 (+23 °C) | 3.5–4 N/mm² |
| QUV | ASTM G53 | 2000 h – Pass |
| Fire Classification | ASTM E-84 | CLASS A |
| Service Temperature | Clever Lab. | −20 °C to +90 °C |
| Initial Drying Time | Clever Lab. | 3–6 h |
| Waiting Time between Coats | Clever Lab. | 8–24 h |
| Solids Content | Clever Lab. | 65% |
Application
• SURFACE PREPARATION
Before application, all contaminants that impair bonding and adhesion, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the substrate. After washing with high-pressure water, the substrate must be dried thoroughly. Surface defects must be repaired with suitable products.
• PRIMING
For absorbent and damp substrates such as concrete, cement or screed, ClvSeal EP PRIMER WB should be preferred. On non-absorbent substrates such as metal, ceramics or old coatings, use PRIMER T. On less demanding substrates, AQUA PUD HYBRID diluted with 15% water can be applied as a primer.
• APPLICATION
Before use, mix for 2–3 minutes with a low-speed mixer. Apply to the primed surface in at least two coats with a roller or brush until the entire surface is covered. Apply the second coat at least 8 and at most 24 hours after applying the first coat. If the second coat cannot be applied within the specified time, consult the CLEVER POLYMERS Technical Department for information and solutions before proceeding.
• Vertical and horizontal areas
• PU foams
• Wet rooms (bathrooms, kitchens, etc.)
• Areas requiring UV resistance
• Lightweight roofs