BİTÜM 2K
Two-Component, Rubber–Bitumen and Cement-Based Waterproofing Material
BİTÜM 2K is a two-component, polymer-modified, rubber–bitumen-based liquid waterproofing material. It bonds excellently to the substrate and forms a flexible, crack-bridging film that is resistant to water and moisture. Complies with EN 15814+A2.
• Thanks to its flexible structure, bridges shrinkage cracks. • Suitable for application on vertical and horizontal surfaces. • High resistance to weather conditions such as freezing and thawing. • Solvent-free. • Environmentally friendly. • Forms a seamless, watertight, robust layer. • Can be applied to both dry and damp substrates. • Suitable for use in enclosed spaces. • Thanks to its excellent adhesion to the substrate, it forms a flexible film that is resistant to water and moisture and has crack-covering properties. Complies with EN 15814+A2.

FEATURES AND BENEFITS
-
• Thanks to its flexible structure, bridges shrinkage cracks. • Suitable for application on vertical and horizontal surfaces. • High resistance to weather conditions such as freezing and thawing. • Solvent-free. • Environmentally friendly. • Forms a seamless, watertight, robust layer. • Can be applied to both dry and damp substrates. • Suitable for use in enclosed spaces. • Thanks to its excellent adhesion to the substrate, it forms a flexible film that is resistant to water and moisture and has crack-covering properties. Complies with EN 15814+A2.
FIELDS OF APPLICATION
-
• Waterproofing of planters
• Concrete walls
• Horizontal and vertical surfaces
• Basements and cellars
• Below-ground parts of structures
• Outdoor areas
• Settling tanks and retaining walls
Product Details
| Field of Application | Minimum Thickness (Dry Film) |
Min. consumption |
| Areas Exposed to Ground Moisture (Non-Accumulating Seepage Water | 2 mm | 3 kg/m² |
| Waterproofing against Temporarily Pressing Water | 3 mm (with glass-fibre reinforcing mesh) |
4.5 kg/m² |
| Areas Exposed to Permanently Pressing Water (Groundwater | 4 mm (with glass-fibre reinforcing mesh) |
6 kg/m² |
22 kg + 8 kg Single Plastic Pail, 30 kg Kit Colours: brown and black.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible. The packaging must always be protected from frost and from air temperatures below 0 °C.
• Concrete strength class: C20/25 • Substrate moisture content: W <10% • Temperature: +5 °C to +35 °C • Relative humidity: <85%
| Property | Test Method | Value |
|---|---|---|
| Product Type | Clever Lab. | Two-component rubber–bitumen and special cement |
| Density | ASTM D1475 / EN ISO 2811-1 (+20 °C) | 1.06 ±0.05 g/cm³ |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Crack-Bridging Ability (+4 °C, 2 mm wet film) | EN 15814+A2 | CB2 |
| Diffusion Resistance Factor (µ) | Clever Lab. | 5,000 – 30,000 |
| Heat Stability | Clever Lab. | +80 °C |
| Cold Flexibility | Clever Lab. | 0 °C (no cracking on bending) |
| Watertightness | EN 15814+A2 | W1 |
| Rain Resistance | EN 15814+A2 | R1 |
| Reduction in Thickness on Drying (28 days) | Clever Lab. | ~20% |
Application
• SURFACE PREPARATION
Before application, all contaminants that would impair adhesion and bonding, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the below-ground surfaces of structures that are in contact with water. After cleaning with high-pressure water, the substrate must be dried. Surface defects and any active water leaks must be repaired with suitable products. A fillet with a minimum radius of 4 cm must be formed at corners and edges.
• PRIMING
To prepare the primer, mix 1 kg of the BİTÜM 2K liquid component with 5 L of water in a separate container using a mixer at 400–600 rpm. Apply by brush, spreading the primer evenly over the substrate without allowing ponding. The primer must be allowed to dry before proceeding with the application.
• APPLICATION
Slowly add the powder component (component B) supplied in the packaging to the liquid material and mix with a mixer at 400–600 rpm until homogeneous (taking care that no lumps form). Allow the prepared mix to stand for 2–3 minutes, then mix again for 20–30 seconds to make it ready for use. At an air temperature of +23 °C, BİTÜM 2K must be used within 60 minutes of preparation. Apply the main coat onto the dried primer. The complete application must consist of at least 2 coats. If applied by brush, each coat must be applied perpendicular to the previous one. Both the application and substrate temperatures must be between +5 °C and +30 °C. Protect the application from severe weather conditions for at least 24 hours. BİTÜM 2K must be applied on the water-facing side. Once the material has fully dried, backfill the foundation excavation, protecting the coating with drainage boards and thermal insulation boards against impact during backfilling.
• BİTÜM 2K must be covered after application.
• Not recommended for unsound substrates.