BİTÜM 2K PLUS
Two-Component, Rubber–Bitumen and Cement-Based, Fibre-Reinforced, Highly Elastic Waterproofing Material
BİTÜM 2K PLUS is a two-component, fast-curing, polymer-modified, fibre-reinforced, rubber–bitumen-based liquid waterproofing material. It bonds excellently to the substrate and forms a flexible film that is resistant to water and moisture, crack-bridging and highly elastic. Complies with EN 15814+A2.
• Watertightness class W2A according to EN 15814+A2.
• Resistant to aggressive groundwater.
• Resistant to aromatic and aliphatic compounds and to substances such as oils.
• Fast curing.
• Thanks to its flexibility, it bridges shrinkage cracks.
• Can be applied to damp substrates.
• High freeze–thaw resistance.
• Solvent-free.
• Environmentally friendly.
• Forms a seamless, watertight, durable layer.
• Suitable for use in enclosed spaces.
• Bonds excellently to the substrate and forms a durable, highly elastic, crack-bridging film that is resistant to water and moisture. EN 15814+A2

FEATURES AND BENEFITS
-
• Watertightness class W2A according to EN 15814+A2.
• Resistant to aggressive groundwater.
• Resistant to aromatic and aliphatic compounds and to substances such as oils.
• Fast curing.
• Thanks to its flexibility, it bridges shrinkage cracks.
• Can be applied to damp substrates.
• High freeze–thaw resistance.
• Solvent-free.
• Environmentally friendly.
• Forms a seamless, watertight, durable layer.
• Suitable for use in enclosed spaces.
• Bonds excellently to the substrate and forms a durable, highly elastic, crack-bridging film that is resistant to water and moisture. EN 15814+A2
FIELDS OF APPLICATION
-
• Basements and cellars
• Concrete walls
• Below-ground parts of structures
• Balconies, terraces and roofs
• Retaining walls and settling tanks
• Waterproofing of planters
Product Details
| Field of Application | Minimum Thickness | Consumption |
| Ground moisture | 2 mm | ~2.5–3 kg/m |
| Seepage/non-pressing water | 2 mm | ~3.5–4 kg/m |
| Accumulating seepage water | 2 mm with reinforcing mesh | ~4.5–5 kg/m |
22 kg + 8 kg Single Plastic Pail, 30 kg Kit Colours: brown and black.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible. The packaging must always be protected from frost and from air temperatures below 0 °C.
• Concrete strength class: C20/25 • Substrate moisture content: W <10% • Temperature: +5 °C to +35 °C • Relative humidity: <85%
| Property | Test Method | Value |
|---|---|---|
| Product Type | Clever Lab. | Two-component rubber–bitumen and special cement |
| Density | ASTM D1475 / EN ISO 2811-1 (+20 °C) | 1.03 ±0.05 g/cm³ |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Crack-Bridging Ability (at +4 °C, 2 mm wet film) | EN 15814+A2 | CB2 |
| Diffusion Resistance Factor (µ) | Clever Lab. | 5,000–30,000 |
| Heat Stability | Clever Lab. | +80 °C |
| Cold Flexibility | Clever Lab. | 0 °C (no cracking on bending) |
| Watertightness | EN 15814+A2 | W2A |
| Rain Resistance | Clever Lab. | R3 |
| Reduction in Thickness on Drying (after 28 days) | Clever Lab. | ~20% |
Application
• SURFACE PREPARATION
Before application, all contaminants that impair bonding and adhesion, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the substrate. After cleaning with high-pressure water, the substrate must be dried thoroughly. Surface defects must be repaired with suitable products.
• PRIMING
For absorbent substrates such as concrete, cement or screed, use PU PRIMER 200 or ClvSeal EP PRIMER 617. On damp substrates, ClvSeal EP PRIMER 625 should be preferred. On non-absorbent substrates such as metal and ceramics, use PRIMER T. For detailed information, refer to the primer table.
• APPLICATION
Slowly add the powder component (component B) contained in the packaging to the liquid material and mix with a mixer at 400–600 rpm until homogeneous (taking care that no lumps form). After the prepared mix has been left to mature for 2–3 min, mix again for 20–30 seconds to make it ready for use. At an air temperature of +23 °C, BİTÜM 2K PLUS must be used within 60 minutes of preparation. The main coat is applied over the dried primer. The entire application must be carried out in at least 2 coats. If applied by brush, successive coats must be applied perpendicular to each other. Both the application and substrate temperatures must be between +5 °C and +35 °C. The application must be protected from severe weather conditions for at least 24 hours. BİTÜM 2K PLUS must be applied on the water-facing side. After the material has dried completely, the foundation excavation must be backfilled, with the coating protected by drainage boards and thermal insulation boards against impacts during backfilling.
• BİTÜM 2K PLUS must be covered after application.
• Not recommended for unsound substrates.