Clv FLEX 100
Cement- and Acrylic-Based, Two-Component, Fully Flexible Waterproofing Material
CLV FLEX 100 is a two-component, fully elastic, cement-based waterproofing material modified with acrylic polymer. Complies with EN 1504-2 and EN 14891.
• Easy to prepare and apply.
• Long working time.
• Thanks to its flexibility, it bridges shrinkage cracks.
• Vapour-permeable.
• Resistant to freeze–thaw cycles.
• High adhesion.
• Forms an excellent watertight layer beneath screed and ceramic tiles.
• Does not shrink or crack.
• In areas subject to movement and vibration.
• Resistant to chemicals in the soil and to salt solutions.

FEATURES AND BENEFITS
-
• Easy to prepare and apply.
• Long working time.
• Thanks to its flexibility, it bridges shrinkage cracks.
• Vapour-permeable.
• Resistant to freeze–thaw cycles.
• High adhesion.
• Forms an excellent watertight layer beneath screed and ceramic tiles.
• Does not shrink or crack.
• In areas subject to movement and vibration.
• Resistant to chemicals in the soil and to salt solutions.
FIELDS OF APPLICATION
-
• Indoors and outdoors, in vertical and horizontal applications, on the water-facing side
• Waterproofing from the positive side
• Water structures, water reservoirs, water tanks and pools
• Floors, and terraces and balconies with a protective covering
• Reinforced concrete walls
• Wet rooms such as kitchens, bathrooms and WCs, before laying screed and ceramic tiles
• Waterproofing of planters
Product Details
1st coat: 1.20 kg/m² 2nd coat: 1.00 kg/m² 3rd coat: 1.00 kg/m²
20 kg A (powder) + 10 kg B (liquid) 30 kg kit Colour: greenish grey
In the original packaging, the application temperature must be between +5 °C and +25 °C; otherwise, wait for suitable conditions. When stored in dry and sheltered conditions, protected from sun, rain and frost, the shelf life is 1 year from the date of production.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Product Type | Clever Lab. | Two-component (fully flexible) cement–acrylic mortar |
| Substrate Temperature | Clever Lab. | +5 °C to +25 °C |
| Service Temperature | Clever Lab. | −20 °C to +80 °C |
| Adhesion to Concrete | Clever Lab. | >1.50 N/mm² |
| Workable Life | Clever Lab. | 2 h (20 °C, 50% RH) |
| Density | Clever Lab. | 1.55 ±0.05 kg/L |
| Resistance to Water under Pressure | Clever Lab. | 7 bar (positive side) |
| Maturing Time | Clever Lab. | 3–5 min |
| Usable Life | Clever Lab. | 2 h |
| Time to Service Loading | Clever Lab. | 2 days – 7 days |
| Watertightness (achieved after) | Clever Lab. | 7 days |
| Capillary Absorption | Clever Lab. | ≤0.10 g (after 4 h) |
| Overcoating – plaster | Clever Lab. | 3 days |
| Overcoating – ceramic tiles | Clever Lab. | 3 days |
Application
• SURFACE PREPARATION
Before applying CLV FLEX 100, all contaminants that would impair adhesion and bonding, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and uncured old membranes, must be removed from the substrate. If necessary, wash the substrate with high-pressure water and then allow it to dry. Surface defects must be repaired with suitable products.
• MIXING
CLV FLEX 100 is a two-component product. First pour component B (liquid) into a clean container. Then slowly add the entire component A (powder) to component B and mix continuously for 4–5 minutes with a low-speed mixer. Allow the mixed material to stand for 3–5 minutes, then mix again for at least 1 minute to make it ready for application. Mixing ratio A:B = 2:1 (by weight)
• APPLICATION
Apply CLV FLEX 100 to the concrete substrate by brush in 2–3 coats, each coat 1–1.5 mm thick. The brush direction of each coat must be perpendicular to that of the previous coat. The waiting time between coats depends on ambient conditions. The application temperature must be +5 °C to +25 °C; otherwise, wait for suitable conditions. Protect the applied product from sun, rain, wind and frost for 24 hours. CLV FLEX 100 gains mechanical strength 2 days after application, becomes watertight after 7 days and reaches its final strength after 14 days. The wet thickness of the applied mortar must be approx. max. 2 mm per coat. For higher strength, durability and flexibility, an elastic synthetic mesh (4 × 4 mm) or reinforcing fleece can be embedded between coats. Fillet tapes must be used at corner joints to increase strength and prevent cracking.