CLV REPAIR 600
Single-Component, Polymer-Reinforced, High-Stability Cementitious Repair Mortar for Bare Concrete
CLV REPAIR 600 is a single-component, cement-based, polymer-modified repair mortar for bare concrete with high stability. It complies with EN 1504-3, class R1.
• Highly thixotropic – non-sagging, easy to shape.
• Crack-free application on large surfaces; practical to use.
• Provides strong adhesion to concrete and plastered surfaces.
• A smooth surface finish is achieved.

FEATURES AND BENEFITS
-
• Highly thixotropic – non-sagging, easy to shape.
• Crack-free application on large surfaces; practical to use.
• Provides strong adhesion to concrete and plastered surfaces.
• A smooth surface finish is achieved.
FIELDS OF APPLICATION
-
• For preparing an even substrate prior to laying ceramic floor and wall tiles
• For plastering and repairing walls and ceilings
• For repairing and plastering bare concrete surfaces
• For repairing and levelling surface defects in concrete elements
Product Details
15.50 kg/m² of powder per 10 mm thickness.
20 kg polyethylene-lined kraft paper bag
12 months from the date of production. Store in the unopened original packaging in a cool, dry place, protected from frost. For short-term storage, stack no more than 3 pallets on top of each other and dispatch on a first-in, first-out basis. For long-term storage, pallets must not be stacked.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Chemical Base | Clever Lab. | Mineral fillers and polymer-modified special cement |
| Shelf Life | Clever Lab. | 12 months |
| Appearance / Colour | Clever Lab. | Grey |
| Density | Clever Lab. | 1.90 kg/L |
| Consumption | Clever Lab. | 15.50 kg/m² per 10 mm thickness |
| Packaging | Clever Lab. | 20 kg polyethylene-lined kraft paper bag |
| Mixed density | Clever Lab. | 1.90 kg/L |
| Mixing Water (per 1 kg powder) | Clever Lab. | 0.225 L |
| Mixing Water (per 20 kg bag) | Clever Lab. | 4.50 L |
Application
• SURFACE PREPARATION
Ensure that the cementitious surfaces of the structure to be repaired are sound, load-bearing, dust-free and clean. The surface must be thoroughly cleaned of all oil, grease, rust and paraffin residues that could impair adhesion.
• MIXING
Pour the appropriate quantity of water into a clean mixing bucket using a measuring container. Mix for 4 minutes with a 400–600 rpm mixer until a homogeneous, lump-free mix is obtained. Allow to stand for approx. 4 minutes and remix for 30 seconds; the material is then ready for use.
Mixing Ratios
| CLV REPAIR 600 | Per 1 kg powder | Per 20 kg bag |
|---|---|---|
| Mixing Water | 0.225 litres | 4.50 litres |
| Mixed density | 1.90 kg/litre | |
• APPLICATION
Apply the prepared mortar to the surface by trowel in a thickness of 5–30 mm. Wait until the mortar has drawn its water, then sprinkle water onto the stiffened mortar with a plasterer's brush and finish the surface as required with a steel or wooden trowel. Large surfaces exposed to the atmosphere, especially in hot, dry or windy conditions, must be protected against rapid evaporation for 24–48 hours after application with wet hessian, water or special curing compounds.
The repair mortar must be applied within 45 minutes at +20 °C. At +30 °C this time is 20–25 minutes. Working and reaction times of cement-based systems are affected by ambient and substrate temperature and by relative humidity. Low temperatures slow down hydration, which extends the pot life and working time. High temperatures accelerate hydration, and the times given above are shortened accordingly. For the material to complete setting, the ambient and substrate temperatures must not fall below the minimum permitted temperature. For exterior applications, the surface must be protected from sun, wind, rain or frost for the first 24 hours after application