ClvCrete MF
Heavy-Duty Polyurethane Floor Coating with Smooth Finish
ClvCrete-MF is a floor coating made from a combination of special polyurethane resins with very high resistance to aggressive chemicals, thermal shock and mechanical loads.
• High resistance to chemicals
• Excellent mechanical strength
• Durability against thermal shock
• Seamless
• Impermeable to liquids
• Suitable for clean rooms
• Very low VOC
• Environmentally friendly

FEATURES AND BENEFITS
-
• High resistance to chemicals
• Excellent mechanical strength
• Durability against thermal shock
• Seamless
• Impermeable to liquids
• Suitable for clean rooms
• Very low VOC
• Environmentally friendly
FIELDS OF APPLICATION
-
• Floors exposed to chemicals
• Areas subject to thermal shock
• Production areas with heavy forklift and foot traffic
• Food, pharmaceutical, textile and heavy machinery industrial facilities
• Floors subject to sudden loading
• Clean rooms, laboratories, packaging and storage areas
Product Details
Primer/scratch coat: consumption 3–4 kg/m² ClvCrete-MF for a thickness of 1.50–2.00 mm Main coat: consumption 5–8 kg/m² ClvCrete-MF for a thickness of 2.50–4.00 mm (These consumption values are theoretical and may vary depending on the condition of the substrate.)
Component A 3 kg plastic canister Component B 3 kg plastic canister Component C 15 kg kraft paper bag Available in red, yellow, green, light blue and grey.
6 months from date of production.
Storage Conditions: Store correctly in the original, unopened and undamaged packaging in a dry place at between +5 °C and +30 °C.
• Relative humidity: max. 80% • Application temperature: min. +10 °C / max. +30 °C • Substrate temperature: min. +10 °C / max. +30 °C • ClvCrete-MF can be applied to fresh, damp concrete without standing water.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Chemical Base | Clever Lab. | Water-based cement–polyurethane hybrid |
| Appearance / Colour | Clever Lab. | Component A Liquid resin Component B Liquid hardener Component C Special filler Available in a wide range of colours. |
| Density | DIN EN ISO 2811-1 | Mixed: 1.97 kg/L |
| Mixing Ratio | Clever Lab. | Mix in the weight ratios supplied in the packaging. A: 3 kg / B: 3 kg / C: 15 kg |
| Consumption | Clever Lab. | Primer–scratch coat: 3–4 kg/m² ClvCrete MF for 1.50–2.00 mm Main coat: 5–8 kg/m² ClvCrete MF for 2.50–4.00 mm |
| Working Time | Clever Lab. | Temperature / Pot Life: +10 °C → 35–40 min +20 °C → 20–25 min +30 °C → 15–20 min +35 °C → 10–15 min |
| Waiting Time between Coats | Clever Lab. | Temperature / Min. – Max.: +10 °C → 24 h – 4 days +20 °C → 16 h – 3 days +30 °C → 12 h – 2 days |
| Time to Traffic | Clever Lab. | Temperature / Pedestrian – Light / Full Cure: +10 °C → 30 h – 48 h / 6 days +20 °C → 16 h – 24 h / 4 days +30 °C → 12 h – 18 h / 3 days |
| Thermal Shock Resistance | Clever Lab. | 4 mm: −15 °C to +70 °C 6 mm: −25 °C to +70 °C |
| Compressive Strength | EN 13892-2 | ~50 N/mm² (28 days / +23 °C) |
| Chemical Resistance | Clever Lab. | Resistant to many aggressive chemicals. Please consult the Clever Polymers Technical Department. |
| Reaction to Fire | EN 13501-1 | Bfl-s1 |
Application
• SURFACE PREPARATION
The concrete substrate must be clean and sound, with sufficient compressive strength (min. 30 N/mm²) and a pull-off strength of min. 1.5 N/mm². The substrate must be clean, dry and free from foreign matter such as dirt, oil, coatings and surface curing compounds. Concrete substrates must be prepared using abrasive equipment to remove cement laitance and achieve an open-textured surface. Weak concrete must be removed, and blowholes and voids must be fully exposed. Surface repairs, filling of blowholes and voids, and levelling of the surface must be carried out with suitable products from the CLV REPAIR range. To ensure that the coating system is fully anchored to the substrate, anchor grooves must be cut at edges, corners and junctions and along the edges of drain outlets and drains.
• MIXING
Mix component A on its own with a low-speed mixer until homogeneous. Then add component B to A and continue mixing for approx. 30 seconds. Once the mix is ready, add the powdered component C to it using a double-paddle mixer. Make sure that component C is mixed thoroughly with the resin components for at least 2 minutes and that a completely homogeneous mix is obtained. When transferring the mix from one container to another, remember to scrape the sides and bottom of the previous container thoroughly with a plastic trowel. Hand tools: Low-speed electric mixers operating at 300–400 rpm must be used to mix components A and B. For the mortar mix, a double-paddle mixer should be preferred.
• APPLICATION
Before starting the application, measure the substrate moisture content, the relative humidity of the environment and the dew point. If these values are outside the permitted limits, do not start the application. The ClvCrete-MF scratch coat can be applied with a steel trowel. For the ClvCrete-MF wear layer, a notched trowel, serrated trowel or height-adjustable pin rake can be used. Use of a spiked roller is recommended to remove any air voids that may form when applying the wear layer. More detailed information can be found in the technical documentation of the relevant system.
• Use only electric warm-air blowers for heating.
• Observe the pot life limits, taking the application conditions into account.
• The product components must never be split.