ClvFloor LT-753
Lithium Silicate-Based High-Gloss Surface Dustproofer
ClvFloor LT-753 is a single-component, water-based, lithium silicate-based liquid surface hardener that provides additional curing, hardening, dustproofing and gloss for trowelled or abraded concrete surfaces.
• Improved surface appearance
• Silky gloss
• Reduced dust formation
• Contributes to impermeability and sealing
• Easy cleaning
• Free from solvents and odour

FEATURES AND BENEFITS
-
• Improved surface appearance
• Silky gloss
• Reduced dust formation
• Contributes to impermeability and sealing
• Easy cleaning
• Free from solvents and odour
FIELDS OF APPLICATION
-
• Industrial floor systems
• Storage and logistics facilities
• Food processing and industrial production facilities
• Commercial buildings
• Car park structures
• Infrastructure projects
• Concrete surface treatment and protection
Product Details
0.05–0.10 L/m² (e.g. 10–20 m²/L on trowelled concrete)
15-litre plastic canister
Store in the original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +30 °C. Shelf life is 12 months from production when correctly stored in the original, unopened and undamaged packaging at +5 °C to +30 °C, protected from frost.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Product Type | Clever Lab. | Single-component, water-soluble lithium silicate solution |
| Density | ASTM D1475 / DIN 53217 / ISO 2811-1 (+20 °C) | 1.16 kg/dm³ ±5% |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Waiting Time between Coats | Clever Lab. | The second coat can be applied after 2–4 hours; the previous coat must be tack-free. |
| Curing Time | Clever Lab. | Touch-dry: 2 h / +20 °C Full hardness: 7 d / +20 °C |
| Time to Traffic | Clever Lab. | +10 °C: 6 h Temperature / Time: +5 °C: ~3.5 h +10 °C: ~4 h +20 °C: ~2 h +25 °C: ~1.5 h |
* Viscosity measured at +25 °C in accordance with EN ISO 3219. Viscosity decreases as temperature rises.
Application
• SURFACE PREPARATION
Developed for topical application to hardened concrete or cementitious surfaces. The surface must be sound, clean and completely free from oil, grease, coatings, cement laitance, surface water and loose particles. In case of doubt, carry out a trial application on a small test area first. For best results, apply at least 28 days after the concrete has been placed or once adequate hydration of the cement has been achieved. It can also be used on polished, power-trowelled or stamped concrete surfaces and on cement-based screeds.
• APPLICATION
Apply with a mechanical or manual sprayer with an adjustable nozzle. After spraying, spread the product evenly over the surface with a microfibre cloth or squeegee; otherwise white stains may form. Once the first coat has dried, apply the second coat in the same way for gloss and uniformity. Water impermeability increases as the chemical reaction progresses; maximum hardness and sealing are achieved in approximately 7 days. For high gloss, burnish the surface with a soft pad once it has dried completely (at least 24 hours).
• Do not apply in areas where curing compounds, sealers or asphalt are present until the surface has been thoroughly cleaned.
• Immediately clean any overspray from glass, aluminium or polished surfaces with water.
• Do not leave any dry areas, to ensure uniform performance.
• Floor performance depends on the cement content, moisture, roughness and penetration of the product.
• Not effective on very weak, low-cement, excessively porous or worn (exposed-aggregate) surfaces.
• Does not conceal large stains or severe wear.