ClvSeal 535
Cement- and Acrylic-Based, Two-Component, UV-Resistant, Flexible Waterproofing Material
ClvSeal 535 is a two-component, cement- and acrylic-based waterproofing material for concrete and cement-based substrates that forms an effective barrier against salts carried by water and gases in the atmosphere.
• Excellent adhesion.
• Easy preparation and application.
• Can be applied by brush or spray machine.
• Long working time.
• Vapour-permeable.
• High strength.
• Resistant to freeze–thaw cycles.
• ClvSeal 535 can be applied to green concrete in situations where conventional waterproofing materials require a curing time of 7–28 days.

FEATURES AND BENEFITS
-
• Excellent adhesion.
• Easy preparation and application.
• Can be applied by brush or spray machine.
• Long working time.
• Vapour-permeable.
• High strength.
• Resistant to freeze–thaw cycles.
• ClvSeal 535 can be applied to green concrete in situations where conventional waterproofing materials require a curing time of 7–28 days.
FIELDS OF APPLICATION
-
• Interior and exterior areas
• Vertical and horizontal applications
• Retaining walls
• Terraces
• Wet areas
• Swimming pools
• Water tanks
• Facilities such as spas and Turkish baths
• Seawater channels
• Areas requiring watertightness and protection against salt water
Product Details
1.7 kg/m²/mm for a thickness of 1 mm.
Apply at least 2 coats.
Note: Consumption is theoretical and varies with the substrate.
Component A (powder): 25 kg kraft paper bag Component B (liquid): 8 kg tin A+B kit: 33 kg kit White
12 months from the date of production. Storage conditions: store correctly in the original, unopened and undamaged packaging in a dry place between +5 °C and +30 °C.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Chemical Base | Clever Lab. | Mineral fillers, polymer-modified additives and special cement / acrylic copolymer dispersion |
| Appearance / Colour | Clever Lab. | White |
| Density | Clever Lab. | Fresh mix: ~1.7 kg/L |
| Packaging | Clever Lab. | 25 kg component A (powder) |
| 8 kg component B (liquid) | ||
| 33 kg A+B kit | ||
| Working Time | Clever Lab. | ~2 h |
| Waiting Time between Coats | Clever Lab. | +10 °C → 12 h |
| +20 °C → 6 h | ||
| +30 °C → 3 h | ||
| Consumption | Clever Lab. | 1 mm = 1.7 kg/m²/mm (min. 2 coats) |
| Note: Consumption is theoretical and varies with the substrate. | ||
| Substrate Temperature | Clever Lab. | +8 °C to +30 °C |
| Maturing Time | Clever Lab. | ~3–5 min |
Application
• SURFACE PREPARATION
The substrate must be dry, sound, predominantly smooth, clean and fine-pored, and free from honeycombing, voids, cracks, protrusions, dust, tar, pitch-forming oil, old paint and other residues that reduce adhesion. Voids must be filled with ClvSeal 535. At vertical and horizontal corners, it must be applied with a minimum radius of 4 cm. Before application, the substrate must be pre-wetted. If the coating loses its water rapidly, this means that the substrate has not been sufficiently pre-wetted. For applications in hot and windy conditions, extra mixing water not exceeding 10% of component B may be added for the first coat only.
• MIXING
Pour liquid component B (ClvSeal 535) into a clean mixing container and slowly add powder component A (ClvSeal 535) while mixing with a mixer at 400–600 rpm. Continue mixing for at least 3–5 minutes until a homogeneous mix is obtained. After allowing it to stand for 3–5 minutes, mix again for approx. 30 seconds; the material is then ready for use.
| ClvSeal 535 | Comp. A | Comp. B | A+B kit |
|---|---|---|---|
| Mix | 25 kg | 8 kg | 33 kg |
• APPLICATION
ClvSeal 535 can be applied in two or three coats using a brush and trowel. The brush direction of each coat must be perpendicular to that of the previous coat. The waiting time between coats may vary depending on ambient conditions.
• When applied at +23 °C, ClvSeal 535 achieves mechanical strength after 2 days, becomes watertight after 7 days and reaches final strength after 14 days • If the application area is below 5 °C or above 25 °C, wait until suitable ambient and substrate temperatures are reached. Application must not be carried out, especially in very hot, rainy and windy weather. • Ambient conditions such as substrate temperature and relative humidity significantly affect the working and reaction times of cement- and acrylic-based systems. Where air temperatures are low, the chemical reaction slows down, extending the working time and the coating time. Particularly when viscosity increases, the coverage decreases. At high temperatures, the chemical reaction accelerates and the working time and coating time are shortened accordingly. For the product to cure fully, the ambient and substrate temperatures must be at least at the permitted minimum values. • For exterior applications, the applied surface must be protected from sun and from weather conditions such as wind, frost and rain for the first 24 hours. • Surfaces subject to foot traffic must be covered with screed or ceramic tiles. Tile adhesives are recommended for laying tiles. • Wet film thickness per coat: max. 1.2 mm. • Immediately after applying ClvSeal 535, it must be cured for at least 3 to 5 days using polyethylene sheeting or similar approved methods, to ensure hydration of the cement and minimise cracking. • If the waiting time exceeds 24 hours, lightly clean the surface with high-pressure water