ClvSeal 820
2-Comp., Elastic, 100% Solids, Very Fast-Curing Pure Polyurea Waterproofing, Special Spray Applied
ClvSeal 820 is a two-component, elastic waterproofing material. It is a 100% solvent-free, 100% solids, pure aromatic polyurea with high abrasion resistance.
• Combines waterproofing, anti-corrosion and top coat paint properties in one product. • Very fast to apply. • Used as a thin layer (2–3 mm). • Provides maximum waterproofing. • Excellent resistance to thermal shock. (−40 °C to +200 °C) • Excellent chemical resistance. • Can be applied to all construction materials. • Very wide application temperature range (5–40 °C); can also be applied at 100% air humidity. • Can be opened to foot traffic 35 seconds after application. • Long-lasting.

FEATURES AND BENEFITS
-
• Combines waterproofing, anti-corrosion and top coat paint properties in one product. • Very fast to apply. • Used as a thin layer (2–3 mm). • Provides maximum waterproofing. • Excellent resistance to thermal shock. (−30 °C to +140 °C) • Excellent chemical resistance. • Can be applied to all construction materials. • Very wide application temperature range (5–40 °C); can also be applied at 100% air humidity. • Gels 5 seconds after application and can be opened to foot traffic after 15 min. • Long-lasting.
FIELDS OF APPLICATION
-
• Car parks and garages
• Balconies and roof coating
• Industrial floors
• Refineries
• Heating pipes, oil pipes, gas pipes
• Water treatment systems
• Oil platforms
Product Details
| Chemical | Result |
|---|---|
| Petrol | No effect |
| Diesel fuel | No effect |
| Hydraulic fluid | No effect |
| Toluene | No effect |
| Acetone | Softening |
| Hexane | No effect |
| 10% NaCl / water | No effect |
| 10% sugar solution | No effect |
| 5% sulphuric acid | No effect |
| 10% hydrochloric acid | No effect |
| Seawater | No effect |
| 10% acetic acid | No effect |
Total consumption (for 2 mm thickness): 2.0 kg/m²
A: 200 kg drum; B: 220 kg drum
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 9 months. Once opened, use the product as soon as possible.
• Concrete strength class: C20/25
• Substrate moisture content: W<5%
• Temperature: +5 °C to +35 °C
• Relative humidity: <85%
| Substrate | Surface Preparation | Primer |
|---|---|---|
| Cementitious Substrates | If req., light quartz sand broadcast; sound, dry substrate | ClvSeal EP PRIMER 617 (light broadcast of 0.3–0.8 mm quartz sand) |
| Unglazed Ceramic Tiles, Cement Screed | Mechanical cleaning; dust removal | ClvSeal EP PRIMER 617 |
| Bituminous Membrane | Mech. cleaning; sound, dry substrate | PU UNIVERSAL PRIMER |
| Bituminous Coating | Mech. cleaning; sound, dry substrate | PU UNIVERSAL PRIMER |
| Metal substrates (iron/galvanised steel, lead, copper, aluminium, brass, stainless steel) | Sanding or blasting; degreasing | PU UNIVERSAL PRIMER |
| Property | Test Method | Value |
|---|---|---|
| Density | ASTM D1475 / EN ISO 2811-1 (+20 °C) | 1.1 g/cm³ |
| Storage Temperature | Clever Lab. | +10 °C to +30 °C |
| Hardness | ASTM D2240 / DIN 53505 / EN ISO 868 | >80 (Shore A) |
| Elongation at Break | EN ISO 527 | 340 - 370% |
| Tensile Strength | DIN 53504 | 12.3 MPa |
| Adhesion to Metal | DIN EN 24624 | >2.3 MPa |
Application
• SURFACE PREPARATION
Before application, all contaminants that impair bonding and adhesion, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the substrate. After washing with high-pressure water, the substrate must be dried thoroughly. Surface defects must be repaired with suitable products.
• MIXING
Dosing and mixing must be carried out with suitable 2-component spray equipment. The recommended product and hose temperatures must be observed. Recommended pressure: components A + B 160–180 bar. The accuracy of dosing and mixing must be checked regularly with the equipment.
• APPLICATION
Before application, determine and confirm that the substrate moisture, relative humidity and dew point conditions are suitable. For the waiting time/overcoating, refer to the data sheets of the relevant products. Other substrates must be tested for suitability. Damaged areas must be covered with tape or suitable materials.
• Application can only be carried out with plural-component hot-spray equipment. • Wear personal protective equipment during application. • Always use the tools and the mix in accordance with the manufacturer's instructions. • The product must be used by experienced professional applicators only. • Do not use ClvSeal 820 where substrate moisture has increased. • If application is carried out while the temperature is rising on substrates prone to outgassing, pinholes may form. • ClvSeal 820 is not to be applied in enclosed spaces. • ClvSeal 820 is not resistant to sunlight and changes colour when exposed to it. However, if exposure to UV radiation is limited to a maximum of 4 weeks, the product performance and technical properties are not affected. Therefore, ClvSeal 820 can be protected from these effects by applying a UV-protective top coat. • On wet surfaces, or where relative humidity is > 80% and air temperature is > +30 °C, PU UNIVERSAL PRIMER must be used as an adhesion promoter. • Note: Always carry out a trial application. • Product temperature Component A +70–80 °C Component B +65–70 °C Hose +65–70 °C