ClvSeal DETAIL
Thixotropic, Fibre-Reinforced PU Liquid Waterproofing for Waterproofing and Protection of Roof Details
ClvSeal DETAIL is a single-component, polyurethane-based liquid waterproofing material. It cures by reaction with atmospheric moisture, is fibre-reinforced and thixotropic, and is easy to apply.
• Thixotropic
• Easy to apply (by roller or brush)
• High tear and abrasion resistance
• Retains its mechanical properties at temperatures between −40 °C and +80 °C
• High weather and UV resistance
• High resistance to chemicals
![]()
FEATURES AND BENEFITS
-
• Thixotropic
• Easy to apply (by roller or brush)
• High tear and abrasion resistance
• Retains its mechanical properties at temperatures between −40 °C and +80 °C
• High weather and UV resistance
• High resistance to chemicals
FIELDS OF APPLICATION
-
• For all waterproofing details
• Concrete surfaces
• Chimneys
• Pipes
• Structural elements on roofs
• Air-conditioning units and gutters
Product Details
Total consumption (approx.): 0.90–1.00 kg/m²
Grey, in 5 kg metal pails.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
• Concrete strength: R28 = 15 MPa
• Substrate moisture content: W <5%
• Temperature: +5 °C to +35 °C
• Relative humidity: <85%
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Product Type | Clever Lab. | Single-component polyurethane |
| Density | ASTM D1475 / EN ISO 2811-1 (+20 °C) | 1.35–1.45 g/cm³ |
| Viscosity | ASTM D2196-86 / EN ISO 3219 (+25 °C) | 5,000–10,000 cP |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Resistance to Heat Ageing | Clever Lab. | 100 days at +80 °C |
| Heat Shock Resistance | Clever Lab. | 200 °C – Pass |
| Hardness | ASTM D2240 / DIN 53505 / EN ISO 868 | >70 Shore A |
| Flash Point | ASTM D93 (closed cup) | 42 °C |
| QUV | ASTM G53 | 2000 h – Pass |
| Service Temperature | Clever Lab. | −40 °C to +80 °C |
| Initial Curing Time | 25 °C / 55% RH | 2–3 h |
| Waiting Time between Coats | Clever Lab. | 6–48 h |
Application
• SURFACE PREPARATION
Before application, all contaminants that impair bonding and adhesion, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the substrate. After washing with high-pressure water, the substrate must be dried thoroughly. Surface defects must be repaired with suitable products.
• APPLICATION
Before use, open the container and mix for 2–3 minutes with a low-speed mixer. Apply the product in at least 2 coats with a roller or brush until the entire surface is covered. Apply the second coat at least 6 and at most 24 hours after applying the first coat. The second coat must be applied within the specified time. Thinning is not recommended.
Not recommended for unsound substrates.