ClvSeal EP PRIMER 151
Two-Component, Solvent-Free Epoxy Primer and Levelling Mortar
ClvSeal EP PRIMER 151 is a two-component, low-viscosity, multi-purpose epoxy primer. In Clvfloor systems it can be applied as an epoxy primer, levelling mortar and epoxy mortar coating.
• Low VOC and low viscosity.
• Good penetration properties.
• Strong adhesion properties.
• Easy to apply.
• Multi-purpose.

FEATURES AND BENEFITS
-
• Low VOC and low viscosity.
• Good penetration properties.
• Strong adhesion properties.
• Easy to apply.
• Multi-purpose.
FIELDS OF APPLICATION
-
• For priming epoxy mortars, reinforced concrete slabs and cementitious screeds
• On substrates of low and medium absorbency
• Primer in Clvfloor epoxy and polyurethane floor coating systems and polyurea systems
• Binder in levelling mortars and repair mortars
Product Details
Component A: 21.25 kg metal pail Component B: 3.75 kg metal pail Components A and B: 25 kg kit Transparent and brown in colour.
24 months from production date.
Storage Conditions: Store correctly in the original, unopened and undamaged packaging in a dry place at between +5 °C and +30 °C.
• Relative humidity: max. 80%
• Application temperature: min. +10 °C / max. +30 °C
• Substrate temperature: min. +10 °C / max. +30 °C
• Substrate moisture content: The moisture content must be max. 4%. (If the moisture content is greater than 4%, apply ClvSeal EP PRIMER 625 as a moisture-barrier primer.) For further information, please consult our Technical Department.
| PROPERTY | TEST METHOD | VALUE | ||
|---|---|---|---|---|
| Chemical Base | Clever Lab. | Epoxy | ||
| Shelf Life | Clever Lab. | 24 months from production date. | ||
| Appearance / Colour | Clever Lab. | Component A: brown, liquid Component B: transparent, liquid | ||
| Density | DIN EN ISO 2811-1 | Mixed: 1.47 kg/L | ||
| Mixing Ratio | Clever Lab. | By weight: A:85 / B:15 | ||
| Solids Content | Clever Lab. | 100 % | ||
| CONSUMPTION | ||||
| Coating System | Mix | Consumption | ||
| Priming | 1–2 × ClvSeal EP PRIMER 151 | 1–2 × 0.35–0.55 kg/m² | ||
| Fine levelling mortar (surface roughness < 1 mm) | 1 part by weight + 0.5 part by weight quartz sand (0.1–0.3 mm) | 1.7 kg/m²/mm | ||
| Medium levelling mortar (surface roughness up to < 2 mm) | 1 part by weight + 1 part by weight quartz sand (0.1–0.3 mm) | 1.9 kg/m²/mm | ||
| Intermediate coat (self-levelling, 1.5–3 mm) | 1 part by weight + 1 part by weight | 1.9 kg/m²/mm | ||
| Quartz sand (0.1–0.3 mm) | ||||
| + optional full broadcast of quartz sand (quartz sand 0.4–0.7 mm) | ~4.0 kg/m² | |||
Application
| APPLICATION LAYER | DESCRIPTION | PRODUCT |
|---|---|---|
| Primer | Low/medium porosity concrete | 1–2 × ClvSeal EP PRIMER 151 |
| Fine Levelling Mortar | Primer | 1–2 × ClvSeal EP PRIMER 151 |
| Fine Levelling Mortar | Levelling Mortar | 1 × ClvSeal EP PRIMER 151 + quartz sand (0.1–0.3 mm) |
| Medium-Thickness Levelling Mortar | Primer | 1–2 × ClvSeal EP PRIMER 151 |
| Medium-Thickness Levelling Mortar | Levelling Mortar | 1 × ClvSeal EP PRIMER 151 + quartz sand (0.1–0.3 mm) |
| Intermediate coat (self-levelling, 1.5–3 mm) | Primer | 1–2 × ClvSeal EP PRIMER 151 |
| Intermediate Coat | Levelling Mortar | 1 × ClvSeal EP PRIMER 151 + quartz sand (0.1–0.3 mm) |
| Epoxy mortar / repair mortar (15–20 mm coating thickness) | Primer | 1–2 × ClvSeal EP PRIMER 151 |
| Bonding Bridge | Primer | 1–2 × ClvSeal EP PRIMER 151 |
| Bonding Bridge | Repair Mortar | ClvSeal EP PRIMER 151 + suitable sand mix |
| The sand mix given below has been found suitable in practice. The particle size distribution is for a coating thickness of 15–20 mm; mix proportions are in parts by weight per 100 parts. 1. 25 parts by weight of quartz sand 0.1–0.5 mm 2. 25 parts by weight of quartz sand 0.4–0.7 mm 3. 25 parts by weight of quartz sand 0.7–1.2 mm 4. 25 parts by weight of quartz sand 2–4 mm Note: The maximum grain size must not exceed 1/3 of the finished coating thickness. The temperatures during application and the grain | ||
• SURFACE PREPARATION
The concrete substrate must be clean and sound, with adequate compressive strength (at least 25 N/mm²) and a pull-off strength of at least 1.5 N/mm². The surface must be clean, dry and free from foreign matter such as dirt, oil and surface curing compounds. Concrete surfaces must be prepared using abrasive equipment to remove the cement laitance and achieve an open-textured surface. Weak concrete must be removed, and blowholes and voids must be fully exposed. Surface repairs, filling of blowholes and voids, and levelling of the surface must be carried out with suitable CLV Repair products. All dust and loose or friable particles must be removed from the surface with a brush and/or vacuum cleaner before the product is applied.
• MIXING
Before mixing, mix Component A mechanically on its own. After adding Component B to Component A, mix continuously for 3 minutes. Once Components A and B have been mixed, add the quartz filler sand according to the substrate conditions and mix for approx. 2 more minutes until a homogeneous, well-mixed material is obtained. To ensure thorough mixing, transfer the materials into another container and mix again until a uniform mix is obtained. Avoid over-mixing to minimise air entrainment.
• APPLICATION
As a primer: Pour the mixed ClvSeal EP PRIMER 151 onto the prepared substrate. ClvSeal EP PRIMER 151 must be applied by brush, roller or squeegee, working in two directions at right angles to each other. Make sure that a pore-free coat covers the substrate. Apply two coats of primer if necessary. Check that sufficient curing time has elapsed before application.
Levelling Mortar Application: Apply the levelling mortar with a notched trowel/squeegee according to the required thickness. Add quartz sand as required. Intermediate Primer Coat Application: Apply ClvSeal EP PRIMER 151 with a brush, roller or squeegee. Depending on the required system and thickness, quartz sand is added to the mix or broadcast onto the surface. Ensure that a pore-free surface is obtained. If necessary, apply two coats.
• Do not apply ClvSeal EP PRIMER 151 to surfaces with rising damp. After application, it must be protected from weather conditions such as rain and snow for at least 24 hours. Use only electric warm-air blower systems for heating. Observe the pot life limits, taking the application conditions into account. • Do not apply to surfaces with rising damp. (Contact the Clever Polymers Technical Department.) For exterior applications, apply when the temperature has started to fall. If the temperature rises after application, blowholes may form. These blowholes must be lightly sanded and sealed with ClvSeal EP Primer 151 containing 3% of 0.1–0.3 mm quartz sand. The example particle size distribution (15–20 mm levelling mortar coating thickness) and mix proportions determined in practical site trials are given below, in parts by weight per 100 parts. 1. 25 parts by weight of quartz sand: 0.1–0.5 mm 2. 25 parts by weight of quartz sand: 0.4–0.7 mm 3. 25 parts by weight of quartz sand: 0.7–1.2 mm 4. 25 parts by weight of quartz sand: 2–4 mm The maximum grain size of the sand mix used must not exceed 1/3 of the finished coating thickness. The most suitable sand type and mix must be determined by preliminary trials according to the required thickness and system.