ClvSeal EP PRIMER 625
Two-Component, Solvent-Free Primer for Damp Substrates
ClvSeal EP PRIMER 625 is a two-component, epoxy-based, low-viscosity, solvent-free epoxy primer used on substrates such as dry and damp concrete.
• Resistant to moisture rising from within the concrete.
• Easy to apply.
• Solvent-free.
• Excellent adhesion to all types of substrates.
• Provides high protection against moisture beneath waterproofing systems.
• Eliminates the risk of blistering of coating materials on damp concrete.
• Moisture barrier in floor coating systems.

FEATURES AND BENEFITS
-
• Resistant to moisture rising from within the concrete.
• Easy to apply.
• Solvent-free.
• Excellent adhesion to all types of substrates.
• Provides high protection against moisture beneath waterproofing systems.
• Eliminates the risk of blistering of coating materials on damp concrete.
• Moisture barrier in floor coating systems.
FIELDS OF APPLICATION
-
• Mixed with a suitable quantity of silica sand as a repair and filling mortar
• Primer application in Clever polyurethane waterproofing systems
• Primer in Clever polyurea and polyurethane waterproofing systems
• On damp concrete substrates, to block moisture and eliminate the risk of blistering
• On steel surfaces, to increase strength
• Primer in Clever floor coating systems
Product Details
Total consumption: 0.3–0.6 kg/m². When used as a repair mortar or filler, consumption will vary depending on the surface roughness.
Comp. A 10 kg, Comp. B 7.59, metal pail, A+B kit: 17.59 kg
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
• Concrete strength class: C20/25 • Substrate moisture content: W<5% • Temperature: +5 °C to +35 °C • Relative humidity: <85% For further information, please consult our Technical Department.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Product Type | Clever Lab. | 2-component epoxy |
| Density | ASTM D 1475 / EN ISO 2811-1 (+20 °C) | 1.40 g/cm³ |
| Mixing Ratio | Clever Lab. | A:B = 57:43 |
| Viscosity | ASTM D4287 (+25 °C) | 900–1300 cP |
| Application Temperature | Clever Lab. | +8 °C to +30 °C |
| Pot Life | Clever Lab. | 30 min |
| Hardness | ASTM D2240 / DIN 53505 / EN ISO 868 | 84 (Shore D) |
| Flexural Strength | Clever Lab. | 20 N/mm² |
| Bond Strength | Clever Lab. | 3.0–5.0 N/mm² |
| Abrasion Resistance | EN ISO 5470-1 | <5% |
| Compressive Strength | Clever Lab. | 60 N/mm² |
| Initial Drying Time | Clever Lab. | 7–8 h |
| Full Drying Time | Clever Lab. | 7 days |
Application
• SURFACE PREPARATION
Before application, all factors that would impair adhesion and bonding, such as oil, grease, paraffin residues and release agents, must be removed from the surface. After washing with high-pressure water, the surface must be dried thoroughly. Surface defects must be repaired with suitable products. It is recommended to use ClvSeal EP PRIMER 625 as a repair mortar by adding silica sand in a ratio of 1/1–1/5. The concrete substrate must have a pull-off strength of min. 1.5 N/mm² and must be at least 3 weeks old. In addition, concrete substrates must be mechanically ground, then washed with water jets and dried.
• APPLICATION
Before use, open the containers and mix each component separately for 2–3 minutes with a low-speed mixer. After Component A has been mixed on its own, add it to Component B and mix again. The mix must be used within 15–20 minutes with a roller, squeegee or brush. The drying time is 7–8 hours. Once the mix has been prepared, the application thickness can be increased by adding silica sand in a ratio of 1/0.5–1/4. If a floor coating or polyurea is to be applied, broadcast 0.1–0.3 mm sand onto ClvSeal EP PRIMER 625 after application.
• Not recommended for unsound substrates.
• Substrate temperature must be between +8 °C and +35 °C.
• Do not mix by hand.
• Do not thin.
• Before application, keep the containers at min. 25 °C and make sure that the containers have reached 20 °C.