ClvSeal EP REPAIR
2-Comp., Reaction-Curing, Solvent-Free Epoxy Repair and Anchoring Mortar
ClvSeal EP REPAIR is a two-component, solvent-free repair, anchoring and fixing mortar that cures by chemical reaction.
• Excellent bonding and adhesion to concrete and steel.
• Easily applied in vertical and horizontal applications.
• Non-sag.
• Resistant to chemicals.
• High filler-carrying capacity.
• Easy to apply; paste-like consistency.

FEATURES AND BENEFITS
-
• Excellent bonding and adhesion to concrete and steel.
• Easily applied in vertical and horizontal applications.
• Non-sag.
• Resistant to chemicals.
• High filler-carrying capacity.
• Easy to apply; paste-like consistency.
FIELDS OF APPLICATION
-
• On concrete and stone walls,
• For bonding and fixing all metal and steel structural elements to concrete
• For fixing seismic dampers and guardrails of bridges and viaducts
• For fixing anchoring elements
• For bonding expansion joint strips
Product Details
Approx. 1.7 kg/m² per 1 mm thickness.
Grey, in 5 kg kits (3.75 kg + 1.25 kg) in metal pails.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
For the technical data of this product, please refer to the Technical Data Sheet or contact our Technical Department.
Application
• SURFACE PREPARATION
Before application, all contaminants that impair bonding and adhesion, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the entire surface. Steel surfaces must be freed from rust by abrasive blasting. If there is running water on the surface, it must be drained, or the water flow must be stopped and blocked with a suitable material.
• PRIMING
No primer is required on substrates prepared as described above.
• APPLICATION
The product is supplied in two-component kits. Components A and B are combined and mixed for 2–3 minutes with a low-speed mixer to make them ready for application. The pot life of the mix is 40 minutes at +20 °C. Higher temperatures shorten the pot life, while lower temperatures extend it. Do not mix by hand. Apply with a spatula, trowel or bulk-loading cartridge gun (foil-pack gun). Fill the prepared holes starting from the bottom. The application thickness must be at least 2 mm and at most 30 mm. For anchor installation, insert the anchor with a twisting motion into the ClvSeal EP REPAIR filled into holes drilled to the depth and width specified in the design, and check that the material overflows out of the hole.