ClvSeal LİKİT 500
Highly Reflective, UV-Resistant, Acrylic-Based Waterproofing Membrane
ClvSeal LİKİT 500 is a UV-resistant, highly reflective, acrylic-based flexible waterproofing material. It offers an ideal solution for roofs. It adheres strongly to old shingles and slate-surfaced membranes. It lowers the surface temperature by reflecting radiant heat.
• Flexible; bridges cracks
• High adhesion capacity
• Vapour-permeable
• UV-resistant; reflects radiant heat
• Reduces indoor temperature and lowers energy consumption
• Prevents the formation of mould and fungi
• Water-based, non-toxic and non-flammable
• Available in a range of colours
![]()
FEATURES AND BENEFITS
-
• Flexible; bridges cracks
• High adhesion capacity
• Vapour-permeable
• UV-resistant; reflects radiant heat
• Reduces indoor temperature and lowers energy consumption
• Prevents the formation of mould and fungi
• Water-based, non-toxic and non-flammable
• Available in a range of colours
FIELDS OF APPLICATION
-
• Roof and wall surfaces
• Concrete, plaster, stone, metal, brick, wood and decorative coatings
• Primerless application on shingles and slate-surfaced membranes
• Metal, zinc and concrete box gutters
• North-facing façades of buildings
• As an exterior façade paint in areas exposed to marine conditions
Product Details
1.5–2 kg/m² (1–1.5 mm thick)
White or light grey, in 20 kg plastic pails.
Store correctly in the original, unopened and undamaged packaging in a dry place at between +5 °C and +30 °C. 12 months from the date of production.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Chemical Base | Clever Lab. | Acrylic |
| Consumption | Clever Lab. | 1.5–2 kg/m² (1–1.5 mm thick) |
| Appearance / Colour | Clever Lab. | White, light grey |
| Density | Clever Lab. | 1.41 kg/L |
| Product Temperature | Clever Lab. | min. +10 °C / max. +30 °C |
| Ambient Temperature | Clever Lab. | min. +10 °C / max. +30 °C |
| Packaging | Clever Lab. | 20 kg plastic pail |
| Curing Time | Clever Lab. | 2–3 h (+20 °C) |
Application
• SURFACE PREPARATION
All surfaces must be clean, and all cement particles, loose parts, dirt, oil, dust and foreign matter must be removed. For better adhesion, the surface must be washed by water jetting or mechanical methods. Can be applied over old paint that is well bonded to the substrate. Absorbent substrates must be primed beforehand. Other metal surfaces must also be given appropriate surface treatment (degreasing, abrading and priming), and sound adhesion must be ensured. Dusty and loose surfaces must be cleaned and primed. If the application is to be made on shingles or slate-surfaced membranes, loose parts and stones on the material must be swept off and removed.
• APPLICATION
Other metal surfaces must also be given appropriate surface treatment (degreasing, abrading and priming), and sound adhesion must be ensured. Dusty and loose surfaces must be cleaned and primed. If the application is to be made on shingles or slate-surfaced membranes, loose parts and stones on the material must be swept off and removed. Apply by brush, roller or by spraying with an airless spray gun so as to achieve the recommended coating thickness, or in two or more coats. Wait 4–8 hours before applying each coat, and allow 24 hours to dry after the final coat. On large areas, a neat appearance can be achieved by dividing the surface into sections with masking tape.