ClvSeal MS 729
High-Perf., 1-Comp., UV-Resistant, Solvent/Isocyanate-Free Roof Waterproofing Membrane
ClvSeal MS 729 is a hybrid polymer-based, single-component, cold-applied, solvent-free and isocyanate-free roof waterproofing membrane. It provides a seamless and durable waterproofing solution for exposed roof areas and structures.
• Seamless membrane – forms a monolithic, jointless surface.
• Single-component – no mixing required; ready to use.
• Cold application – no heat or flame is used.
• Free from solvents and isocyanates – non-toxic, VOC-compliant.
• Vapour-permeable – allows the substrate to breathe.
• Strong adhesion to most substrates – see the table for details.

FEATURES AND BENEFITS
-
• Seamless membrane – forms a monolithic, jointless surface.
• Single-component – no mixing required; ready to use.
• Cold application – no heat or flame is used.
• Free from solvents and isocyanates – non-toxic, VOC-compliant.
• Vapour-permeable – allows the substrate to breathe.
• Strong adhesion to most substrates – see the table for details.
FIELDS OF APPLICATION
-
• Suitable for roof waterproofing in both new construction and renovation projects.
• Easy to apply even on hard-to-access roofs with complex details.
• Economically extends the service life of existing roofs whose waterproofing performance has declined.
Product Details
~2.0–2.2 kg/m²
7 kg aluminium foil; 2 packs in a 7 kg plastic pail; grey.
Store properly in the original, unopened and undamaged packaging in a dry place at between 5 °C and +30 °C. 9 months from the date of production.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Chemical Base | Clever Lab. | Single-component hybrid polymer |
| Shelf Life | Clever Lab. | 9 months from production date |
| Appearance / Colour | Clever Lab. | Grey |
| Packaging | Clever Lab. | 7 kg plastic pail |
| Consumption | Clever Lab. | ~2.0–2.2 kg/m² |
| Ambient Temperature | Clever Lab. | +5 °C min. / +35 °C max. |
| Substrate Moisture Content | Clever Lab. | < 6% |
| Waiting Time between Coats | Clever Lab. | 12–24 h. Do not exceed 24 h. |
| Applied Product Ready for Use | Clever Lab. | Full mech./chem. properties in approx. 7 days |
| SUBSTRATE | PRIMER | CONSUMPTION (ml/m²) |
|---|---|---|
| Cementitious Substrates | No primer required | - |
| Brick and Stone | Not normally required; on porous and dusty substrates, use ClvSeal EP PRIMER. | Refer to the Technical Data Sheet of the relevant primer |
| Ceramic tiles (unglazed) and concrete slabs | No primer required | - |
| Bituminous Felt | ClvSeal EP PRIMER only for fresh (volatile) bitumen or high-reflectance applications. | Refer to the Technical Data Sheet of the relevant primer |
| Synthetic Membranes | Membrane type, age and condition vary; carry out a test before application. | - |
| Bituminous Coatings | Not normally required; for high-reflectance applications, use ClvSeal EP PRIMER. | Refer to the Technical Data Sheet of the relevant primer |
| Metals: ferrous or galvanised metals, lead, copper, aluminium, brass or stainless steel | ClvSeal EP PRIMER must be applied. | Refer to the Technical Data Sheet of the relevant primer |
| Existing Hyperproof Waterproofing System | No primer required. | - |
Application
• SURFACE PREPARATION
The substrate must be sound, of adequate strength, clean and dry, and free from dirt, oil, grease and other residues. Depending on the type of material, the substrate must be primed or cleaned by mechanical methods. If necessary, grinding may be carried out to level the surface. Suitable substrates are: concrete, bituminous membranes and coatings, metal, brick, asbestos cement, ceramic tiles and timber surfaces. Consult the Technical Department regarding preparatory priming.
• MIXING
Before application, stir ClvSeal MS 729 gently but thoroughly for approx. 1 minute to obtain a homogeneous mix. Gentle mixing minimises the formation of air bubbles.
• APPLICATION
If a primer coat has been used before application, it must have cured tack-free. For the waiting time/overcoating, please refer to the PDS of the relevant primer. Damaged areas (handrails, etc.) must be protected with tape or plastic sheeting. Please remember: always start with the details before starting to waterproof the horizontal surface. Apply the product in 2 coats by roller or brush with a total consumption of approx. 2.0–2.2 kg/m². If a primer has been used before the application of ClvSeal MS 729, the primer must have fully cured and must leave no tackiness on the surface before proceeding to the next layer. Depending on which primer is used, the TDS of the relevant product must be consulted for the waiting time between coats. During application, it is recommended to cover fragile areas or areas at risk of damage (bases of railings, junctions, etc.) with protective tape or plastic sheeting. Also remember that all detail areas (such as corners, parapet junctions and drain outlet details) must be completed before starting waterproofing on horizontal surfaces. The product is applied in two coats by roller or brush with a total consumption of approx. 2.0–2.2 kg/m².
• Condition of aggregates: Aggregates must be completely dry. Even a slightly elevated moisture content can cause the formation of bubbles or foam.
• Surface preparation: Do not apply on dusty, loose or non-cohesive substrates.
• Temperature conditions: Do not apply the product below 8 °C or above 30 °C.
• Damp substrates: Do not apply on damp substrates or in areas with rising damp.