ClvSeal PU 650 TC-1K
Single-Component Aliphatic Top Coat for PU Roof Waterproofing Systems
ClvSeal PU 650 TC-1K is a single-component, PU-based, aliphatic top coat with high UV resistance. It is an elastic top coat for PU waterproofing membranes. It cures by reaction with atmospheric moisture to form a continuous, flexible, coloured film.
• Easy to apply (by brush, roller or spray)
• UV-resistant
• Thanks to its aliphatic structure, it retains its colour when exposed to sunlight and does not fade or yellow.
• Provides excellent bonding and adhesion to the substrate
• Resistant to permanent water contact
• Excellent chemical resistance
• Excellent mechanical properties, tear strength and tensile resistance

FEATURES AND BENEFITS
-
• Easy to apply (by brush, roller or spray)
• UV-resistant
• Thanks to its aliphatic structure, it retains its colour when exposed to sunlight and does not fade or yellow.
• Provides excellent bonding and adhesion to the substrate
• Resistant to permanent water contact
• Excellent chemical resistance
• Excellent mechanical properties, tear strength and tensile resistance
FIELDS OF APPLICATION
-
• As an elastic top coat for polyurethane waterproofing
• Over building materials such as wood, stone, marble or brick
• Exposed roofs
• Surfaces requiring high abrasion resistance
Product Details
Consumption (min.): 0.20–0.50 kg/m²/coat
20 kg metal pail; colours: white and grey.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Product Type | Clever Lab. | Single-component aliphatic PU |
| Density | ASTM D1475 / DIN 53217 / ISO 2811-1 (+20 °C) | 1.15–1.25 g/cm³ (±0.01) |
| Viscosity | ASTM D2196-86 (+25 °C) | 100–500 cP |
| Gloss | Clever Lab. | Glossy |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Resistance to Heat Ageing | EOTA TR 011 | 100 days at +80 °C |
| Hardness | ASTM D2240 / DIN 53505 / EN ISO 868 | >75 Shore A |
| Elongation at Break | ASTM D412 (+23 °C) | 500% |
| Tensile Strength at Break | ASTM D412 (+23 °C) | 10 N/mm² |
| QUV | ASTM G53 | 2000 h |
| Initial Curing Time | 25 °C / 55% RH | 4–6 h |
| Waiting Time between Coats | Clever Lab. | 6–24 h |
* Viscosity measured at +25 °C in accordance with EN ISO 3219. Viscosity decreases as temperature rises.
Application
• SURFACE PREPARATION
Before application, all factors that would impair adhesion and bonding, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the entire surface. After washing with high-pressure water, the surface must be dried. Surface defects must be repaired with suitable products.
• PRIMING
PU PRIMER 200 must be used on absorbent substrates such as concrete, cement or screed, and PRIMER T on non-absorbent substrates. Can be applied by brush. No primer is required when used as a top coat over polyurethane and polyurea applications.
• APPLICATION
Before use, open the container and mix for 2–3 minutes with a low-speed mixer. When mixing ClvSeal PU 650 TC-1K, take care not to entrain a large amount of air into the material. If air is entrained, visible air bubbles will form after the material has cured on the substrate. The material is applied by pouring it onto the primed substrate and spreading it over the entire surface with a roller or brush.
• Not recommended for unsound substrates.
• Not suitable for waterproofing swimming pools containing chemically treated water.
• When overcoating polyurethane waterproofing materials, the waiting time between coats must not be exceeded.