ClvSeal PU 800
2-Component, Solvent-Free PU Waterproofing Material Applied with Special Spray Machine
ClvSeal PU 800 is a two-component, highly reactive waterproofing membrane. It is applied with special plural-component spray equipment.
• Provides fast reaction and a short curing time.
• Can be applied on vertical surfaces without running.
• Easy to apply on complex details.
• Monolithic structure – no joints, welds or seams.
• Provides full bonding.
• High water vapour permeability – low risk of blistering.
• Provides superior mechanical strength and crack bridging.
• Resistant to puncture and standing water.
• Owing to its thermoset structure, it does not soften at high temperatures.
• Withstands up to 240 °C in hot-poured asphalt applications.
• Remains elastic at low temperatures (Tg ≈ −45 °C).
• Solvent-free, VOC-compliant.

FEATURES AND BENEFITS
-
• Fast reaction and short curing time. • Can be applied on vertical surfaces without running. • Easy to apply on complex details. • Monolithic structure – no laps, welds or seams. • Full-surface adhesion. • High water vapour permeability – low risk of blistering. • Superior mechanical strength and crack bridging. • Resistant to puncture and standing water. • Does not soften at high temperatures thanks to its thermoset structure. • Withstands up to 240 °C in hot-poured asphalt applications. • Retains its elasticity at low temperatures. (Tg ≈ −45 °C) • Solvent-free, VOC-compliant
FIELDS OF APPLICATION
-
• Bridge, car park and podium decks
• Such as cut-and-cover tunnels and basements
• Concrete, steel and bituminous substrates with a suitable primer
• Can be applied to many substrates such as screed, glass-fibre-reinforced polyester and wood.
Product Details
Total consumption (for 2 mm thickness): 2.0 kg/m²
Component A: 220 kg drum; Component B: 210 kg drum
Component A: 18 months from the date of production. Component B: 12 months from the date of production. Store the product in its original, unopened and undamaged packaging in a dry place at temperatures between +15 °C and +25 °C. Do not expose to direct sunlight. Always refer to the packaging.
| Substrate | Primer |
|---|---|
| Cementitious Substrates | ClvSeal EP PRIMER 617, light quartz sand broadcast 0.3–0.8 mm |
| Unglazed Ceramic Tiles, Cement Screed | ClvSeal EP PRIMER 617 |
| Bituminous Membrane | PU UNIVERSAL PRIMER |
| Bituminous Coating | PU UNIVERSAL PRIMER |
| Metal: iron or galvanised metals, lead, copper, aluminium, brass or stainless steel | PU UNIVERSAL PRIMER |
Note: For waiting times / top coat application, refer to the Technical Data Sheets of the relevant products. Other substrates must be tested for suitability.
| Property | Test Method | Value |
|---|---|---|
| Shore A Hardness | DIN 53505 | ~80 |
| Tensile Strength | DIN 53504 | ~10.0 N/mm² (28 days / +23 °C) |
| Elongation at Break | DIN 53504 | ~400% (28 days / +23 °C) |
| Crack-Bridging Ability | DIN EN 1062-7 | Dynamic: B4.2 / Static: A5 |
| Root Resistance | DIN 4062 | Resistant to root penetration |
| Resistance to Heat Ageing | — | −40 °C to +120 °C |
| Chemical Base | — | Polyurethane |
| Shelf Life | — | 12 months |
| Appearance / Colour | — | Grey (may yellow under UV exposure) |
| Density | — | ~1.05 kg/L (dry film) |
| Waiting Time between Coats | Substrate Temperature Min. / Max. | +20 °C ~24 h / ~2 days |
| Applied Product Ready for Use | Rain Resistance / Light Foot Traffic (with care) / Foot Traffic / Ambient Conditions | ~5 min / ~5 min / ~18 min / +20 °C |
Application
• MIXING
Dosing and mixing must be carried out with suitable 2-component spray equipment. The recommended product and hose temperatures must be observed. Recommended pressure: components A + B 160–180 bar. The accuracy of dosing and mixing must be checked regularly with the equipment.
• APPLICATION Before application, determine and confirm that the substrate moisture, relative humidity and dew point conditions are suitable. For waiting time/top coat application, refer to the Technical Data Sheets of the relevant products. Other substrates must be tested for suitability. Damaged areas must be covered with tape or suitable materials. Waterproofing: Apply ClvSeal PU 800 with multi-component, heated, high-pressure metering spray equipment. UV coating: A single coat of ClvSeal PU 650 TC 1K is applied by roller or airless spray. For more detailed information, refer to the application methods.
• Application can only be carried out with plural-component hot-spray equipment.
• Wear personal protective equipment during application.
• Always use the equipment and the mix in accordance with the manufacturer's instructions.
• The product must be used by experienced professional applicators only.
• Do not use ClvSeal PU 800 in areas with rising substrate moisture.
• If application is carried out while the temperature is rising on substrates prone to outgassing, pinholes may form.
• ClvSeal PU 800 must not be applied in enclosed areas.
• ClvSeal PU 800 is not resistant to sunlight and discolours when exposed to it. However, if exposure to UV radiation is limited to a maximum of 4 weeks, the performance and technical properties of the product are not affected. ClvSeal PU 800 can therefore be protected from these effects by applying a UV-protective top coat over it.
• On wet substrates, or where the relative humidity is > 80% and the air temperature is > +30 °C, PU UNIVERSAL PRIMER must be used as an adhesion promoter.
• Note: Always carry out a trial application.