ClvSeal TC 2K POOL
Two-Component, Chlorine-Resistant, UV-Resistant Aliphatic Top Coat for Pools
ClvSeal TC 2K POOL is a water-based, two-component aliphatic coating. It provides outstanding resistance to UV radiation and chlorinated water in all colours.
• Water-based and easy to apply. • Fast curing. • Resistant to chlorinated water • Excellent UV resistance. • Can be tinted with water-based pigments. • Strong intercoat adhesion • Fully aliphatic polyurethane-based; provides superior UV resistance in every colour. • Adheres strongly to epoxy and polyurethane surfaces; thanks to its rheological properties, it allows easy application on vertical surfaces.

FEATURES AND BENEFITS
-
• Water-based and easy to apply. • Fast curing. • Resistant to chlorinated water • Excellent UV resistance. • Can be tinted with water-based pigments. • Strong intercoat adhesion • Fully aliphatic polyurethane-based; provides superior UV resistance in every colour. • Adheres strongly to epoxy and polyurethane surfaces; thanks to its rheological properties, it allows easy application on vertical surfaces.
FIELDS OF APPLICATION
-
• Vertical and horizontal areas,
• Exterior façade areas,
• Swimming pools,
• Areas requiring UV resistance,
• Protective top coat over polyurethane and epoxy systems
Product Details
Minimum consumption: 150 g/m²
Comp. A: 4 kg, Comp. B: 0.8 kg
Can be stored for a minimum of 12 months in unopened original pails in dry conditions at temperatures between 5 and 25 °C. Material in opened pails should be used as soon as possible.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Chemical Base | Clever Lab. | Water-based, PU-based |
| Solids Content | Clever Lab. | 50%–60 |
| Viscosity | ASTM D2196 | 300–600 cP |
| QUV (4 h UVA/UVB lamps at 60 °C and 4 h condensation at 50 °C) | ASTM G53 | Pass |
| Density | ASTM D1475 / DIN 53217 | 1.00–1.10 kg/L |
Application
• MIXING
Use a low-speed mixer (300 rpm). Add the second component and mix for several minutes. Add 5–10% pigment paste by weight and mix until the colour of the product is homogeneous.
• APPLICATION
Apply over an epoxy-based pool coating or a polyurethane waterproofing coating. If more than 72 hours have passed since the application of the main coat, please carry out an adhesion test. Apply by roller or spray. Do not overwork the applied material by excessive rolling, otherwise roller marks may remain. The product dries faster than other materials. Therefore, any additional rolling after the initial application will cause defects in the surface appearance. Never apply the second coat before the first coat has dried completely. ClvSeal TC 2K POOL is a slippery coating. If a slippery finish is not desired, please add quartz sand or another mineral. Do not apply below +5 °C.
• Not recommended for unsound substrates.