ClvStone 190
Epoxy Binder for Terrazzo Floor Systems, Decorative Mortars and Top Coats
ClvStone 190 is a two-component epoxy resin for mortars, screeds, terrazzo, and decorative and protective coats. It is used in terrazzo and decorative coatings in areas where high mechanical strength and abrasion resistance are required.
• Creates a flawless and aesthetic surface.
• Has a stylish and elegant design.
• An eye-catching decorative product.
• Long-lasting
• High resistance to yellowing.
• Provides good mechanical strength and chemical resistance.
• Low VOC and environmentally friendly.
• Creates an artistic effect.
• Multi-purpose binder.
• Transparent.

FEATURES AND BENEFITS
-
• Creates a flawless and aesthetic surface.
• Has a stylish and elegant design.
• An eye-catching decorative product.
• Long-lasting
• High resistance to yellowing.
• Provides good mechanical strength and chemical resistance.
• Low VOC and environmentally friendly.
• Creates an artistic effect.
• Multi-purpose binder.
• Transparent.
FIELDS OF APPLICATION
-
• Used for decorative and elegant designs on terrazzo floors.• Used as an aesthetic surface for natural and mineral-coloured stones.
• Used as a transparent top coat for coloured quartz mortars, screeds and smooth-finish coatings.
• Used for normal to medium-heavy mechanical loading.
• Suitable for use in food and pharmaceutical production facilities, showrooms and workshops.
Product Details
Top coat: applied at a consumption of ~0.15 kg/m². Wear layer: applied at consumption rates of ~0.7–2 kg/m². Note: These values are theoretical and do not allow for additional material required due to surface porosity, variations in level and wastage. For detailed information, refer to the decorative system data sheets.
Component A (liquid): 7.5 kg metal pail Component B (liquid): 2.5 kg metal pail A+B kit: 10 kg kit Transparent
24 months from production date.
Storage conditions: store correctly in the original, unopened and undamaged packaging in a dry environment at between +5 °C and +30 °C. Protect from direct sunlight.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Chemical Base | Clever Lab. | Epoxy |
| Shelf Life | Clever Lab. | 24 months from date of production |
| Appearance / Colour | Clever Lab. | Resin (A): liquid; Hardener (B): yellowish, liquid |
| Density | Clever Lab. | Component A: ~1.2 kg/L Component B: ~1.0 kg/L A+B: ~1.1 kg/L (23 °C) |
| Packaging | Clever Lab. | 7.5 kg Comp. A 2.5 kg Comp. B 10 kg Kit (A+B) |
| Working Time | Clever Lab. | +10 °C: ~60 min +20 °C: ~30 min +30 °C: ~20 min |
| Curing Time | Clever Lab. | +10 °C: 45 h–4 days +20 °C: 36 h–3 days +30 °C: 24 h–2 days |
| Temperature – Traffic – Curing Data | Clever Lab. | +10 °C: Foot traffic ~36 h | Light loads ~5 days | Full cure ~10 days +20 °C: Foot traffic ~12 h | Light loads ~3 days | Full cure ~7 days +30 °C: Foot traffic ~8 h | Light loads ~2 days | Full cure ~5 days |
| Applied Product Ready for Use | Clever Lab. | Top coat: ~0.15 kg/m² Wear layer: ~0.7–2 kg/m² Note: Values are theoretical; consumption may vary due to substrate porosity and wastage. |
Application
• SURFACE PREPARATION
The concrete substrate must be clean and sound, with adequate compressive strength (at least 25 N/mm²) and a pull-off tensile strength of at least 1.5 N/mm². The surface must be clean, dry and free from foreign matter such as dirt, oil, coatings and surface curing compounds. High spots and protrusions must be removed (by sanding, etc.). All dust and loose or friable particles must be removed from the surface with a brush and/or a vacuum cleaner before application of the product.
• MIXING
Mixing Ratio: Component A : Component B = 75:25 (by weight). Mix Component A mechanically in its own container. After adding Component B to Component A, mix continuously for 2–3 minutes until a uniform mix is obtained. To ensure thorough mixing, transfer the materials to another container and mix thoroughly again. Mix until a homogeneous mix is obtained, then pour onto the application area. Avoid over-mixing to minimise air entrainment.
• APPLICATION
ClvStone 190 for mortars: add the pre-mixed ClvStone 190 to the decorative stones and mix until a homogeneous mix is obtained. ClvStone 190 must be mixed thoroughly with a low-speed (300–400 rpm) electric mixer or other suitable equipment. Use a rotating-pan, trough or flat-type mixer to prepare mortars. Drum-type (free-fall) concrete mixers must not be used. Avoid over-mixing to minimise air entrainment.
• Marks may form in the resin in areas subject to heavy point loads, with underfloor heating systems or with high ambient temperatures; take care.
• Do not apply ClvStone 190 to surfaces with increased moisture or damp.
• If the ambient conditions need to be heated, do not use gas, oil, paraffin or other fossil-fuel heaters. They release large amounts of CO2 and H2O water vapour, which affect the surface texture. Use only electric warm-air blower systems for heating.
• Colour change (yellowing) may occur in areas exposed to UV radiation; this does not impair the performance or function of the coating.
• Incorrect assessment and treatment of cracks may reduce the service life and cause the cracks to reflect through the coating.
• Trial applications of the mortar mixes must be carried out to achieve the specified aggregate colour and particle size distribution (grading)
• Newly applied ClvStone 190 must be protected from damp, condensation and water for at least 24 hours.
• Trial applications must be carried out before application to verify aggregate colour matching, particle size distribution and visual uniformity.