PRIMER T
Single-Component Polyurethane Primer for Transparent, Glazed and Glossy Surfaces
PRIMER T is a single-component polyurethane primer developed for non-absorbent substrates.
• Easy to apply (by brush or cloth).
• Fast curing.
• Combines excellently with non-absorbent substrates.
• Provides excellent adhesion.

FEATURES AND BENEFITS
-
• Easy to apply (by brush or cloth).
• Fast curing.
• Combines excellently with non-absorbent substrates.
• Provides excellent adhesion.
FIELDS OF APPLICATION
-
• Glass
• Ceramics
• Glass ceramics
• Wall tiles
Product Details
Total consumption (minimum): 0.05–0.07 L/m²
4 L metal pail; transparent.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Density | ASTM D1475 / EN ISO 2811-1 (+20 °C) | 0.80 ± 0.05 g/cm³ |
| Viscosity | ASTM D2196-86 / EN ISO 3219 (+25 °C) | 30–50 cP |
| Flash Point | ASTM D93 (closed cup) | 42 °C |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Initial Curing Time | 25 °C / 55% RH | 10–15 min |
| * Viscosity measured at +25 °C in accordance with EN ISO 3219. Viscosity decreases as temperature rises. | ||
Application
• SURFACE PREPARATION
Before application, all factors that would impair adhesion and bonding, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the entire surface. After washing with high-pressure water, the surface must be dried. Surface defects must be repaired with suitable products.
• APPLICATION
Open the container and mix the material for 2–3 minutes with a low-speed mixer or by hand. Apply without thinning. Apply to the surface to be primed with a brush or cloth until the entire surface is covered. The PU waterproofing material must be applied after 10–15 minutes.
• Not recommended for unsound substrates.
• Avoid ponding.