PU PRIMER 200
Single-Component Polyurethane Primer for Damp Concrete
PU PRIMER 200 is a single-component, polyurethane-based primer developed for all substrates.
• Easy to apply (by brush, roller or spraying).
• Combines excellently with non-absorbent substrates.
• Provides excellent adhesion.
• Impregnates the substrate, covering it very well and uniformly.
• Fast curing.

FEATURES AND BENEFITS
-
• Easy to apply (by brush, roller or spraying).
• Combines excellently with non-absorbent substrates.
• Provides excellent adhesion.
• Impregnates the substrate, covering it very well and uniformly.
• Fast curing.
FIELDS OF APPLICATION
-
• Concrete
• Plaster
• Gypsum and cement boards and timber surfaces.
• Primer for polyurethane-based waterproofing materials.
• Damp concrete substrates.
• Non-absorbent substrates.
• Glass, metal and marble surfaces.
Product Details
Total consumption (minimum): 0.20–0.25 L/m².
20 L metal pail Transparent
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Product Type | Clever Lab. | Single-component polyurethane |
| Density | ASTM D1475 / EN ISO 2811-1 (+20 °C) | 1.00 ± 0.05 g/cm³ |
| Viscosity | ASTM D2196-86 / EN ISO 3219 (+25 °C) | 30–60 cP |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Tensile Strength at Break | ASTM D412 (+23 °C) | 30 N/mm² |
| Adhesion to Concrete | ASTM D1640 (+23 °C) | >4 N/mm² |
| Initial Drying Time | 25 °C / 55% RH | 3–6 h |
| Overcoating Time | Clever Lab. | 6–12 h |
Application
• SURFACE PREPARATION Before application, all factors that could impair adhesion and bonding, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the entire surface. After washing with high-pressure water, the surface must be dried. Surface defects must be repaired with suitable products.
• APPLICATION
Open the container and mix the material for 2–3 minutes with a low-speed mixer or by hand. Apply without thinning. Pour the product onto the surface to be primed and spread it with a roller or brush until the entire surface is covered. Airless spraying is recommended for large surfaces. The PU waterproofing material or joint sealant must be applied after 4–6 hours.
• After PU PRIMER 200 has been applied, the PU waterproofing material must always be applied before the surface has hardened (before the chemical reaction is complete).
• Not recommended for unsound substrates.
• Not suitable for waterproofing swimming pools containing chemically treated water.