PU UNIVERSAL PRIMER
Two-Component, Solvent-Free, Polyurethane-Based Tie Primer
PU UNIVERSAL PRIMER is a two-component, solvent-free, polyurethane-based primer.
• Easy to use. • Zero VOC. • Excellent adhesion strength. • Rapid curing. • Easy to clean. • Easy to use in enclosed areas. • Waterproofing material can be applied on the same day. • Can be used as a filler and geotextile adhesive.

FEATURES AND BENEFITS
-
• Easy to use. • Zero VOC. • Excellent adhesion strength. • Rapid curing. • Easy to clean. • Easy to use in enclosed areas. • Waterproofing material can be applied on the same day. • Can be used as a filler and geotextile adhesive.
FIELDS OF APPLICATION
-
• In all polyurethane waterproofing systems • On bituminous membranes • On substrates such as metal, galvanised metal and marble
Product Details
Consumption (min.): 100–200 g/m²
Component A in 2 kg metal pail, brown Component B in 3 kg metal pail, transparent yellow
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
The technical data of this product are currently being updated. Please contact our Technical Department for the current values.
Application
• SURFACE PREPARATION
Before application, all factors that could impair adhesion and bonding, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the surface. After washing with high-pressure water, the surface must be dried. Surface defects must be repaired with suitable products.
Before use, open the containers and mix for 2–3 minutes with a low-speed mixer. Then apply in a minimum of 1 coat with a roller or brush until the entire surface is covered. The main waterproofing coat can be applied after 2–3 hours.
• This is a fast-curing product. To facilitate application, thinning with 5–10% CLEVER 001 is recommended.
• For applications on non-porous dry concrete, a higher thinning ratio may be required to improve adhesion (even up to 30%).
• Not recommended for unsound substrates.
• Must be applied within a maximum of 25 minutes after mixing.
• The main coat must be applied no later than 10 hours after the primer application.