TRANS ALM
1-Comp. Transparent UV-Resistant PU Liquid Waterproofing
TRANS ALM is a transparent, aliphatic polyurethane-based, single-component liquid membrane applied for waterproofing and protection.
• Excellent mechanical properties.
• High UV resistance.
• Excellent resistance to adverse weather conditions.
• Easy to apply (by roller or airless spray).
• Being a pure polyurethane, it can be in permanent contact with water.
• Retains its mechanical properties at temperatures between −40 °C and +80 °C.
• Very strong adhesion.
• Resistant to alkalis and chemicals; retains its transparency and elasticity even after many years.
• Effectively permeable to water vapour: as the film breathes, no moisture accumulates beneath the coat.
• Can be applied in thick coats; does not form bubbles.
• Cures by reaction with atmospheric moisture, adhering continuously to the substrate to form a transparent, durable and elastic film.
![]()
FEATURES AND BENEFITS
-
• Excellent mechanical properties. • High UV resistance. • Excellent resistance to adverse weather conditions. • Easy to apply (by roller or airless spray). • As a pure polyurethane, it can be in permanent contact with water. • Retains its mechanical properties at temperatures between −40 °C and +80 °C. • Very strong adhesion. • Resistant to alkalis and chemicals; retains its transparency and elasticity even after many years. • Effective water vapour permeability: as the film breathes, no moisture builds up beneath the coating. • Applied in thick coats without forming bubbles. • Cures by reaction with atmospheric moisture and adheres seamlessly to the substrate, forming a transparent, durable and elastic film.
FIELDS OF APPLICATION
-
• Verandas and balconies
• Terraces
• Concrete and natural stone surfaces
• Glass surfaces
• Ceramic surfaces
Product Details
Total consumption (minimum): 0.20–1.00 L/m²
Transparent, in 4 L metal pails.
Store the product in its unopened original packaging at temperatures between +5 °C and +25 °C for a maximum of 12 months. Once opened, use the product as soon as possible.
• Concrete strength class: C20/25
• Substrate moisture content: W <5%
• Temperature: +5 °C to +35 °C
• Relative humidity: <85%
| PROPERTY | TEST METHOD | VALUE |
|---|---|---|
| Product Type | Clever Lab. | Single-component polyurethane |
| Density | ASTM D1475 / DIN 53217 / ISO 2811-1 (+20 °C) | 1.00 (±0.05) g/cm³ |
| Viscosity | ASTM D4287 (+25 °C) | 1,000–2,000 cP |
| Water Vapour Permeability | ASTM E96 | 0.8 g/(m²·h) |
| Application Temperature | Clever Lab. | +5 °C to +35 °C |
| Resistance to Heat Ageing | EOTA TR011 | 100 days at +80 °C |
| Heat Shock Resistance | Clever Lab. | 200 °C – Pass |
| Solids Content | Clever Lab. | 80% (±5) |
| Hardness | ASTM D2240 / DIN 53505 | >40 Shore D |
| Elongation at Break | ASTM D412 / EN ISO 527-3 (+23 °C) | >300% |
| Tensile Strength at Break | ASTM D412 / EN ISO 527-3 (+23 °C) | >25 N/mm² |
| Flash Point | ASTM D93 (closed cup) | 30 °C |
| QUV | ASTM G53 | 3000 h – Pass |
| Service Temperature | Clever Lab. | −40 °C to +80 °C |
| Initial Curing Time | 25 °C / 55% RH | 6 h |
| Waiting Time between Coats | Clever Lab. | 6–24 h |
| Hydrolysis Res. (KOH 8%, 10 d at 50 °C) | Clever Lab. | Unaffected |
| Chem. Resistance (NaOCl 5%, 10 d) | Clever Lab. | Unaffected |
| Water Absorption | Clever Lab. | ≤1.4% |
Application
• SURFACE PREPARATION
Before application, all contaminants that impair bonding and adhesion, such as oil, grease, paraffin residues, cement laitance, loose particles, release agents and old cured membranes, must be removed from the substrate. After washing with high-pressure water, the substrate must be dried thoroughly. Surface defects must be repaired with suitable products.
• PRIMING
On non-absorbent substrates such as metal, ceramics or old coatings, use PRIMER T. Polished, non-absorbent surfaces such as glazed ceramic tiles, glass and glass blocks must be primed with PRIMER T. Apply PRIMER T with a cloth and make sure that priming is complete. After 15–20 minutes, apply TRANS ALM by brush or roller; the waiting time between coats must not exceed 24 hours.
• APPLICATION
Before use, mix by hand or with a low-speed mixer to make the product ready for use. Apply undiluted. Pour onto the primed surface and spread in one or two coats with a roller or brush until the entire surface is covered. Apply the second coat at least 6 and at most 24 hours after applying the first coat; the waiting time between coats must not exceed 24 hours. Clean the tools used within 2 hours after application.
Not recommended for unsound substrates.